8 basic ways to knit marine knots

In order to properly tie a knot in the sea, first of all, you need to remember that the fixed end of the rope is called the root, and the movable - running. There are several simple examples of knitting that are useful in everyday life and during outdoor activities.

How to tie a sea knot Bulin

It is also called gazebo and is referred to the fundamental nodes. It contains elements of several schemes, which gives it universal properties: fastening allows you to moor, secure sailors, fix the rope to the hook. The damper is very reliable, it can be used with almost all cables, regardless of material and thickness. The gazebo is quickly tied up and easily untied (but not spontaneously), it does not slip, and when used in marine conditions it shows high reliability.

Knot Bulin

The knot knot pattern for beginners:

  1. Loop from top to bottom.
  2. Pass the running end through it from the bottom up.
  3. Hold the chassis behind the main one and skip it again into the loop.
  4. When the running end is enclosed in the resulting small loop, the rope must be tightened tightly.

To unleash a pancake, it is enough to slightly shift the loop in the direction from the chassis to the root end.

Knitting a sea knot figure eight

This is a typical modification, which got its name due to its characteristic shape. Eight is usually performed to form a stopper or a stable attachment. The main plus is that it is easy to deal with, even if the rope gets wet.

Knot eight

How to knit a sea knot:

  1. Draw around the running end of the root, pull the first from above so that a loop is obtained.
  2. Pierce the resulting loop with the running end so that it can then be made for itself.
  3. Tighten.

A beautiful knot is formed with rounded outlines of the figure eight.

Straight navy knit pattern

One of the oldest modifications, in ancient Greece, the knot was called Hercules. With it, you can firmly connect two ropes having approximately the same diameter. But the scheme cannot be called reliable: at high loads, the junction will be excessively stretched, often it slides along the cable. It is not recommended for use in critical situations and when activities involving immersion in water are planned.

Straight knot

Classical technique:

  1. Take 2 running ends of the cables, one should cover the second.
  2. The second end forms an open loop.
  3. In this loop, it is necessary to stretch the rope so that the first end is also braided.
  4. Tighten both ropes.

There is a subspecies of the direct knot - the reef, it differs in the possibility of quick untying.

Half bayonet and bayonet

The half-bayonet is not tightened; for its implementation, the object on which it is planned to fasten the cable is wrapped with the running end, circled around the root and passed through the formed loop. Further, both ends are held together. The node is able to withstand heavy weight, is reliable.

Bayonet Knot

Using a bayonet, the mooring ends are fixed and towing is performed. It is based on 3 half-bayonets - this amount is enough for any purpose. It can not be considered that 4 or 5 half-bayons are stronger, the effect will be the same when used.

How to tie a sea knot fishing bayonet

Sea knot fishing bayonet

This variation has ancient roots, it has reached our days due to the fact that it allows you to fix the rope as anchored as possible, adapted for all types of manipulations in conditions of strong traction. Initially, you need to fix the cable on the subject with the help of an additional barrier, then you can proceed to the formation of half-bayons. The first one is to grab the barrier surrounding the base.

The scheme of the thieves' maritime hub

The scheme of the thieves' maritime hub

If the ends of the rope are not visible, externally this knot cannot be distinguished from the straight one. It got its name due to the fact that this similarity was actively used on ships in order to identify the theft of personal property of sailors, provisions. The compound is used mainly for domestic purposes, since when pulled, the knot can spontaneously untie.


  1. The running end of the first rope is folded into a loop.
  2. The second cable is threaded into this loop in such a way as to capture the root and running ends, lead out in the opposite direction.
  3. Tighten both double ends.

In this way, orientation cords are often fastened.

How to tie a woman's and mother-in-law's sea knot: a simple scheme

Variations are extremely similar: these are two erroneous ways of forming a thieves' knot. The names "women" and "mother-in-law" are based on everyday specifics of use - they are universally used for connecting ropes, but they do not take into account the unreliability and even some danger of sliding fastening.

Woman's knot

Knitting a sea knot is not difficult: two running ends pass through each other in different directions and duplicate this action in mirror image.

Professionals-sailors and adherents of an active lifestyle demonstrate a woman’s knot only for educational purposes, since its use in the field is fraught with injuries and damage to property.

The mother-in-law's knot differs from the lady's one in that here the ends of the cable come from the finished combination in the diagonal direction. The modification was first used in European countries in shipping, but subsequently it was replaced by more practical and strong knitting options that do not have the ability to spontaneously untie. Now in practice it can be found only in the subsidiary farm as an auxiliary link for packaging raw materials and food products.

To execute the mother-in-law unit:

  1. To form an incomplete loop from the running end of one rope.
  2. Run the second end into the loop in the direction from top to bottom, go around the first rope and bring it out.

Even if you tighten it tightly, it is likely that with further tension the ligament will open.

Types and methods of performing a knot stranglehold

The noose knot can be performed in a straight, flat, fishing variation. In the first case, a strong connection is formed, which increases the strength when wet.

Knot Choke

Knitting pattern:

  1. Form an open loop on the rope: give it the shape of the letter "s" and proceed with the formation of the turns located as tightly as possible in relation to each other.
  2. Thread the running end into the lower ear remaining after winding the rope.
  3. Tighten.

The carabiner choke has a narrow scope - it is popular with professional climbers. Here the running end is fixed on the carabiner with an 8-shaped connection, the remaining part of the rope, if necessary, can be passed through the carabiner with the coverage of a support, say, a tree.

The stranglehold on the support is knitted as follows: the rope covers the support, enters the loop and wraps around it 3 times, then passes into a small loop. Even if the rope is wet, a stable connection forms, which can be used without support.

All sea nodes, despite the characteristic name of the category, are widespread in everyday life. Thieves, mother-in-law and women - a quick opportunity to drag the neck of the bag, a noose with a skillful approach helps in working with goods and sports. All bayonet variations allow you to quickly fix the rope on a stationary support. It must be remembered that the strength of the connection depends not only on the skill of tying, but also on the strength of the rope.

Watch the video: How to Tie a Figure Eight Knot (February 2020).